Whirlpool Top Load Washer Error Code F0E5: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool top load washer error code F0E5 means: The load is unbalanced or too large. [1] Keep using it? Yes, after rebalancing. Start with the owner checks below, beginning with: cancel and drain.

Quick facts

Code	F0E5
Also shown as	F0 E5
Brand / appliance	Whirlpool top load washer (top load washers)
System	Load balance
Official meaning	The load is unbalanced or too large. [1]
Keep using it?	Yes, after rebalancing
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F0E5 means on a Whirlpool top load washer

The load is unbalanced or too large. [1]

This is a load balance code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool top load washer error code F0E5 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Cancel and drain. Cancel the cycle and run a drain-only cycle if water is present.
Rearrange the load. Redistribute the clothing or remove some items so the load is level and not overloaded; Bulky or Heavy Duty cycles can help.
Restart. Restart the cycle, or run Drain & Spin if only the spin is left.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code F0E5 mean on a Whirlpool top load washer?

Whirlpool lists F0E5 as follows: The load is unbalanced or too large.

Is it safe to keep using the top load washer with F0E5?

Yes, after rebalancing.

Can I fix Whirlpool top load washer error F0E5 myself?

Only with the owner checks on this page, starting with: cancel and drain. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Is F0 E5 the same as F0E5?

Yes. Whirlpool's documentation lists F0 E5 with the same meaning as F0E5; the display format depends on the model.

Sources

Whirlpool Product Help: F0E5 - Error Code (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.