Whirlpool Top Load Washer Error Code Lid: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool top load washer error code Lid means: The lid was left open. After 10 minutes the cycle resets and the water drains. [1] Keep using it? Yes. Start with the owner checks below, beginning with: close the lid.

Quick facts

Code	Lid
Also shown as	None listed by the manufacturer
Brand / appliance	Whirlpool top load washer (top load washers)
System	Door / lock
Official meaning	The lid was left open. After 10 minutes the cycle resets and the water drains. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code Lid means on a Whirlpool top load washer

The lid was left open. After 10 minutes the cycle resets and the water drains. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool top load washer error code Lid (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Close the lid. Close the lid to clear the display.
Restart if drained. If the washer drained, start again without adding more detergent.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code Lid mean on a Whirlpool top load washer?

Whirlpool lists Lid as follows: The lid was left open. After 10 minutes the cycle resets and the water drains.

Is it safe to keep using the top load washer with Lid?

Yes.

Can I fix Whirlpool top load washer error Lid myself?

Only with the owner checks on this page, starting with: close the lid. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Sources

Whirlpool Product Help: Lid - Error Code (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.