Electrolux Washer Error Code E41: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Electrolux washer error code E41 means: The control board thinks the door switch is open. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: close the door.

Quick facts

Code	E41
Also shown as	None listed by the manufacturer
Brand / appliance	Electrolux washer (front load washers)
System	Door / lock
Official meaning	The control board thinks the door switch is open. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Electrolux support (owner.electrolux.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E41 means on an Electrolux washer

The control board thinks the door switch is open. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Electrolux washer error code E41 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Electrolux's published guidance [1], rewritten for clarity.

Close the door. Close it completely and listen for a click.
Clear the door. Remove clothes or debris keeping it from closing.
Check the latch. Make sure the latch and striker work properly.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Units installed in the last 30 days: contact your installer
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Electrolux support (owner.electrolux.com) first

Frequently asked questions

What does error code E41 mean on an Electrolux washer?

Electrolux lists E41 as follows: The control board thinks the door switch is open.

Is it safe to keep using the washer with E41?

Not until the cause is fixed.

Can I fix Electrolux washer error E41 myself?

Only with the owner checks on this page, starting with: close the door. If it persists, call a technician or Electrolux support (owner.electrolux.com).

Sources

https://owner.electrolux.com/support-articles/article/1820509-laundry-front-loading-washer-displaying-error-code-e41-door-is-open- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.