Electrolux Washer Error Code E11: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Electrolux washer error code E11 means: The washer isn't filling with water during the wash phase. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: wait out the lock.

Quick facts

Code	E11
Also shown as	None listed by the manufacturer
Brand / appliance	Electrolux washer (front load washers)
System	Water fill
Official meaning	The washer isn't filling with water during the wash phase. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Electrolux support (owner.electrolux.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E11 means on an Electrolux washer

The washer isn't filling with water during the wash phase. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Electrolux washer error code E11 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Electrolux's published guidance [1], rewritten for clarity.

Wait out the lock. E11 can lock the washer for up to 6 minutes. Unplugging restarts the timer.
Check hose positions. Make sure the hot supply goes to the hot inlet and cold to cold.
Check water supply. Check the water supply requirements in your Use and Care Guide.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Units installed in the last 30 days: contact your installer
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Electrolux support (owner.electrolux.com) first

Frequently asked questions

What does error code E11 mean on an Electrolux washer?

Electrolux lists E11 as follows: The washer isn't filling with water during the wash phase.

Is it safe to keep using the washer with E11?

Not until the cause is fixed.

Can I fix Electrolux washer error E11 myself?

Only with the owner checks on this page, starting with: wait out the lock. If it persists, call a technician or Electrolux support (owner.electrolux.com).

Sources

https://owner.electrolux.com/support-articles/article/1820068-laundry-front-loading-washer-displaying-error-code-e11-long-fill-time- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.