Frigidaire Washer Error Code E4: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire washer error code E4 means: The washer is out of balance during spin. [1] Keep using it? Yes. Start with the owner checks below, beginning with: check the feet.

Quick facts

Code	E4
Also shown as	None listed by the manufacturer
Brand / appliance	Frigidaire washer (top load washers (e1–e5); f2 applies to front load)
System	Load balance
Official meaning	The washer is out of balance during spin. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Frigidaire support (owner.frigidaire.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E4 means on a Frigidaire washer

The washer is out of balance during spin. [1]

This is a load balance code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire washer error code E4 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Frigidaire's published guidance [1], rewritten for clarity.

Check the feet. Make sure the washer rests firmly on the floor and adjust the leveling legs.
Remove shipping foam. Check the foam shipping support was removed (see the installation instructions).
Redistribute. If the washer can't fix it in three tries, spread the clothes evenly.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Units installed in the last 30 days: contact your installer
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first

Frequently asked questions

What does error code E4 mean on a Frigidaire washer?

Frigidaire lists E4 as follows: The washer is out of balance during spin.

Is it safe to keep using the washer with E4?

Yes.

Can I fix Frigidaire washer error E4 myself?

Only with the owner checks on this page, starting with: check the feet. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

https://owner.frigidaire.com/support-articles/article/1830117-laundry-top-loading-washer-displaying-error-code-e4-washer-is-out-of-balance- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.