Frigidaire Washer Error Code E2: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire washer error code E2 means: Water takes too long to drain, or isn't draining properly. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check power.

Quick facts

Code	E2
Also shown as	None listed by the manufacturer
Brand / appliance	Frigidaire washer (top load washers (e1–e5); f2 applies to front load)
System	Drain
Official meaning	Water takes too long to drain, or isn't draining properly. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Frigidaire support (owner.frigidaire.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E2 means on a Frigidaire washer

Water takes too long to drain, or isn't draining properly. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire washer error code E2 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Frigidaire's published guidance [1], rewritten for clarity.

Check power. Check the fuse or circuit breaker.
Check the standpipe. Check the standpipe height.
Close the lid. Close the lid and press Start/Pause. The washer won't spin with the lid open.
Clear the drain hose. Straighten or unclog the drain hose.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drain hose

When to call a technician

Units installed in the last 30 days: contact your installer
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first

Frequently asked questions

What does error code E2 mean on a Frigidaire washer?

Frigidaire lists E2 as follows: Water takes too long to drain, or isn't draining properly.

Is it safe to keep using the washer with E2?

Not until the cause is fixed.

Can I fix Frigidaire washer error E2 myself?

Only with the owner checks on this page, starting with: check power. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

https://owner.frigidaire.com/support-articles/article/1829699-laundry-top-loading-washer-displaying-error-code-e2-water-takes-too-long-to-drain- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.