Frigidaire Washer Error Code E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire washer error code E1 means: Water isn't entering the washer, or it is filling slowly. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: close the lid.

Quick facts

Code	E1
Also shown as	None listed by the manufacturer
Brand / appliance	Frigidaire washer (top load washers (e1–e5); f2 applies to front load)
System	Water fill
Official meaning	Water isn't entering the washer, or it is filling slowly. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Frigidaire support (owner.frigidaire.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E1 means on a Frigidaire washer

Water isn't entering the washer, or it is filling slowly. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire washer error code E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Frigidaire's published guidance [1], rewritten for clarity.

Close the lid. Check the lid isn't open.
Open both faucets. Fully open the hot and cold faucets.
Check pressure and hoses. Make sure water pressure is adequate and straighten any kinked inlet hoses.
Clean the screens. Disconnect the hoses and clean the hose filter screens.
Check for leaks. Look for water leaking from the tub.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

None of the steps help: schedule service
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first

Frequently asked questions

What does error code E1 mean on a Frigidaire washer?

Frigidaire lists E1 as follows: Water isn't entering the washer, or it is filling slowly.

Is it safe to keep using the washer with E1?

Not until the cause is fixed.

Can I fix Frigidaire washer error E1 myself?

Only with the owner checks on this page, starting with: close the lid. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

https://owner.frigidaire.com/support-articles/article/1829698-top-loading-washer-displaying-error-code-e1-long-fill-time (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.