Kenmore 110 model Oasis top-load washer Error Code F72: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Kenmore 110 model Oasis top-load washer error code F72 means: Basket re-engagement failure. The basket fails to engage the drive system for the spin mode. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Kenmore 110 model Oasis top-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

Code	F72
Also shown as	None listed by the manufacturer
Brand / appliance	Kenmore 110 model Oasis top-load washer
System	Drain
Meaning (service chart)	Basket re-engagement failure. The basket fails to engage the drive system for the spin mode. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	Kenmore customer support (kenmore.com) or a Sears-authorized technician
Source document	Kenmore 110 model Oasis top-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F72 means on a Kenmore 110 model Oasis top-load washer

Basket re-engagement failure. The basket fails to engage the drive system for the spin mode. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Kenmore 110 model Oasis top-load washer error code F72 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Kenmore 110 model Oasis top-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (F72) and copy the full model number from the rating label, so you can confirm this chart applies to your 110 model Oasis top-load washer and order the right parts.
Check. Check to see if the water drained out.
Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
Test and decide. Run a short cycle or restart and watch the display. If F72 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore 110 model Oasis top-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drive system components Water filters Find the perfect fit for your refrigerator. Try our water filter finder Most common symptoms to help you fix your washers Choose a symptom to see related washer repairs. View all Why won't my washing machine drain? Main causes: clogged drain hose
House drain clogged
Bad drain pump
Water-level pressure switch failure
Bad control b... Read more Why your washing machine won't finish its cycle Main causes: broken lid switch
Lid lock
Bad pressure switch
Broken shifter assembly

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Kenmore customer support (kenmore.com) or a Sears-authorized technician first

Frequently asked questions

What does error code F72 mean on a Kenmore 110 model Oasis top-load washer?

The Kenmore 110 model Oasis top-load washer error-code chart lists F72 as follows: Basket re-engagement failure. The basket fails to engage the drive system for the spin mode.

Is it safe to keep using the 110 model Oasis top-load washer with F72?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Kenmore 110 model Oasis top-load washer error F72 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.

Sources

Sears PartsDirect: Kenmore 110 model Oasis top-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.