ErrorCodePro · Appliance Error CodesKenmore 363 electronic control model dishwasher Error Code C1: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Kenmore 363 electronic control model dishwasher error code C1 means: Drain time exceeded 2 minutes. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Kenmore 363 electronic control model dishwasher error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | C1 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Kenmore 363 electronic control model dishwasher |
| System | Drain |
| Meaning (service chart) | Drain time exceeded 2 minutes. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Kenmore customer support (kenmore.com) or a Sears-authorized technician |
| Source document | Kenmore 363 electronic control model dishwasher error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code C1 means on a Kenmore 363 electronic control model dishwasher
Drain time exceeded 2 minutes. [1]
This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Kenmore 363 electronic control model dishwasher error code C1 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (C1) and copy the full model number from the rating label, so you can confirm this chart applies to your 363 electronic control model dishwasher and order the right parts.
- Clear any clog or debris. Clear clogs from the sink drain. Check the drain pump for a clog or damage.
- Check the drain hose. Unplug the dishwasher and clear clogs from the dishwasher drain hose.
- Test and decide. Run a short cycle or restart and watch the display. If C1 comes back after these checks, stop using the dishwasher for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore 363 electronic control model dishwasher error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Drain pump
- Drain hose
When to call a technician
- If the drain hose is damaged, a technician should replace it.
- If the drain pump is damaged, a technician should replace it.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Kenmore customer support (kenmore.com) or a Sears-authorized technician first
Related error codes
Frequently asked questions
What does error code C1 mean on a Kenmore 363 electronic control model dishwasher?
The Kenmore 363 electronic control model dishwasher error-code chart lists C1 as follows: Drain time exceeded 2 minutes.
Is it safe to keep using the 363 electronic control model dishwasher with C1?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Kenmore 363 electronic control model dishwasher error C1 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.
Sources
- Sears PartsDirect: Kenmore 363 electronic control model dishwasher error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.