Kenmore 363 electronic control model dishwasher Error Codes: Full List & Meanings

Every Kenmore 363 electronic control model dishwasher error code in the Kenmore 363 electronic control model dishwasher error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Kenmore customer support (kenmore.com) or a Sears-authorized technician.

Codes by system

Drain

Leak protection

Heating

Suds / detergent

Power supply

All Kenmore 363 electronic control model dishwasher error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Meaning	System	Owner action
C1	Drain time exceeded 2 minutes.	Drain	Owner checks
C2	Drain time exceeded 7 minutes.	Drain	See page
C3	Won't drain.	Drain	See page
C4	Dishwasher overfilled.	Leak protection	Owner checks
C5	Drain time is too short (Dishwasher is underfilled).	Drain	Owner checks
C6	Water temperature too low.	Heating	Owner checks
C7	Water temperature sensor is defective.	Heating	Reset only
C8	Detergent dispenser cover is blocked.	Suds / detergent	Owner checks
PF	Power failure.	Power supply	Owner checks
Cup Open	Detergent dispenser cover has not been closed. A turbidity sensor. When your dishwasher isn't working, use the symptoms and DIY troubleshooting advice to find the cause of the problem.	Suds / detergent	Owner checks

Symptoms

Sources

Sears PartsDirect: Kenmore 363 electronic control model dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.