ErrorCodePro · Appliance Error CodesKenmore 664 model electric slide-in range Error Code F2E1: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Kenmore 664 model electric slide-in range error code F2E1 means: Stuck key. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Kenmore 664 model electric slide-in range error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | F2E1 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Kenmore 664 model electric slide-in range |
| System | Control / electronics |
| Meaning (service chart) | Stuck key. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Kenmore customer support (kenmore.com) or a Sears-authorized technician |
| Source document | Kenmore 664 model electric slide-in range error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code F2E1 means on a Kenmore 664 model electric slide-in range
Stuck key. [1]
This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Kenmore 664 model electric slide-in range error code F2E1 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (F2E1) and copy the full model number from the rating label, so you can confirm this chart applies to your 664 model electric slide-in range and order the right parts.
- Clear the code at the controls. Press down and around all keys on the keypad to free the stuck button.
- Check the power supply. Unplug the range or shut off the house circuit breakers for the range to disconnect electrical power for 30 seconds, and then restore power to range.
- Test and decide. Run a short cycle or restart and watch the display. If F2E1 comes back after these checks, stop using the range for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore 664 model electric slide-in range error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Key panel
- Oven control board
When to call a technician
- If the code reappears after restoring power, disconnect power and replace the key panel.
- If the problem continues, a technician should replace the oven control board. (The oven control board includes the key panel on models beginning with 664.9511.)
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Kenmore customer support (kenmore.com) or a Sears-authorized technician first
Related error codes
Frequently asked questions
What does error code F2E1 mean on a Kenmore 664 model electric slide-in range?
The Kenmore 664 model electric slide-in range error-code chart lists F2E1 as follows: Stuck key.
Is it safe to keep using the 664 model electric slide-in range with F2E1?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Kenmore 664 model electric slide-in range error F2E1 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.
Sources
- Sears PartsDirect: Kenmore 664 model electric slide-in range error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.