ErrorCodePro · Appliance Error Codes

LG Washer Error Code FE: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

LG washer error code FE means: Water is overfilling. The drain pump runs to prevent leaks. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check the dispenser.

Quick facts

CodeFE
Also shown asE04, E12
Brand / applianceLG washer (front load washers)
SystemWater fill
Official meaningWater is overfilling. The drain pump runs to prevent leaks. [1]
Keep using it?Not until the cause is fixed
DIY-safe?Owner checks only (listed below)
SupportLG: 1-800-243-0000

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code FE means on an LG washer

Water is overfilling. The drain pump runs to prevent leaks. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix LG washer error code FE (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on LG's published guidance [1], rewritten for clarity.
  1. Check the dispenser. Check whether extra water is coming in through the detergent dispenser.
  2. Restart. Unplug for 60 seconds, then restart.
  3. Test drain. Start Quick 30. If it doesn't begin by draining, stop and turn off the washer.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Frequently asked questions

What does error code FE mean on an LG washer?

LG lists FE as follows: Water is overfilling. The drain pump runs to prevent leaks.

Is it safe to keep using the washer with FE?

Not until the cause is fixed.

Can I fix LG washer error FE myself?

Only with the owner checks on this page, starting with: check the dispenser. If it persists, call a technician or LG: 1-800-243-0000.

Is E04 the same as FE?

Yes. LG's documentation lists E04, E12 with the same meaning as FE; the display format depends on the model.

Sources

  1. LG USA Support: Front Load Washer Error Code List (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with LG.