LG Washer Error Code IE: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

LG washer error code IE means: The tub did not fill to the right level in time. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: open the faucet.

Quick facts

Code	IE
Also shown as	E02, E10
Brand / appliance	LG washer (front load washers)
System	Water fill
Official meaning	The tub did not fill to the right level in time. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	LG: 1-800-243-0000

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code IE means on an LG washer

The tub did not fill to the right level in time. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix LG washer error code IE (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on LG's published guidance [1], rewritten for clarity.

Open the faucet. Make sure the supply hose is connected and the faucet is open.
Straighten the hose. Make sure the hose isn't pinched or bent.
Check for freezing. In winter, thaw the faucet with a hot towel and the hose in water no hotter than 50 °C (122 °F).
Clean the inlet filter. Turn off the faucet, detach the hose and clean the inlet filter.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Supply is fine but IE persists (possible inlet valve fault)
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact LG: 1-800-243-0000 first

Frequently asked questions

What does error code IE mean on an LG washer?

LG lists IE as follows: The tub did not fill to the right level in time.

Is it safe to keep using the washer with IE?

Not until the cause is fixed.

Can I fix LG washer error IE myself?

Only with the owner checks on this page, starting with: open the faucet. If it persists, call a technician or LG: 1-800-243-0000.

Is E02 the same as IE?

Yes. LG's documentation lists E02, E10 with the same meaning as IE; the display format depends on the model.

Sources

LG USA Support: Front Load Washer Error Code List (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with LG.