Whirlpool Top Load Washer Error Code F0E8: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool top load washer error code F0E8 means: Too much water was left in the washer. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: drain and spin.

Quick facts

Code	F0E8
Also shown as	F0 E8
Brand / appliance	Whirlpool top load washer (top load washers)
System	Drain
Official meaning	Too much water was left in the washer. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F0E8 means on a Whirlpool top load washer

Too much water was left in the washer. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool top load washer error code F0E8 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Drain and spin. Run a Drain & Spin cycle to remove the water.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

F0E8 persists
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code F0E8 mean on a Whirlpool top load washer?

Whirlpool lists F0E8 as follows: Too much water was left in the washer.

Is it safe to keep using the top load washer with F0E8?

Not until the cause is fixed.

Can I fix Whirlpool top load washer error F0E8 myself?

Only with the owner checks on this page, starting with: drain and spin. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Is F0 E8 the same as F0E8?

Yes. Whirlpool's documentation lists F0 E8 with the same meaning as F0E8; the display format depends on the model.

Sources

Whirlpool Product Help: F0E8 - Error Code (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.