Whirlpool Top Load Washer Error Code F9E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool top load washer error code F9E1 means: The washer is taking too long to drain. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check drain hose depth.

Quick facts

Code	F9E1
Also shown as	F9 E1, drn, Ld
Brand / appliance	Whirlpool top load washer (top load washers)
System	Drain
Official meaning	The washer is taking too long to drain. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F9E1 means on a Whirlpool top load washer

The washer is taking too long to drain. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool top load washer error code F9E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Check drain hose depth. Make sure the drain hose goes no more than 4.5 in (114 mm) into the standpipe and don't tape over the drain opening.
Check hose height. Make sure the drain hose end is more than 36 in above the floor, so the washer doesn't siphon.
Check for kinks. Straighten the drain hose and clear any blockage in the drainpipe or sink.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drain hose

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code F9E1 mean on a Whirlpool top load washer?

Whirlpool lists F9E1 as follows: The washer is taking too long to drain.

Is it safe to keep using the top load washer with F9E1?

Not until the cause is fixed.

Can I fix Whirlpool top load washer error F9E1 myself?

Only with the owner checks on this page, starting with: check drain hose depth. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Is F9 E1 the same as F9E1?

Yes. Whirlpool's documentation lists F9 E1, drn, Ld with the same meaning as F9E1; the display format depends on the model.

Sources

Whirlpool Product Help: F9E1 - Error Code (official)
Whirlpool Product Help: drn - Error Code (official)
Whirlpool Product Help: Ld - Error Code (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.