Frigidaire Washer Error Code E3: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire washer error code E3 means: The lid is open or the lid lock has failed. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: close the lid.

Quick facts

Code	E3
Also shown as	None listed by the manufacturer
Brand / appliance	Frigidaire washer (top load washers (e1–e5); f2 applies to front load)
System	Door / lock
Official meaning	The lid is open or the lid lock has failed. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Frigidaire support (owner.frigidaire.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E3 means on a Frigidaire washer

The lid is open or the lid lock has failed. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire washer error code E3 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Frigidaire's published guidance [1], rewritten for clarity.

Close the lid. Make sure the lid is completely closed.
Level the washer. Make sure the unit is level.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

The lid doesn't lock after starting (possible lid lock or board failure)
Units installed in the last 30 days: contact your installer
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first

Frequently asked questions

What does error code E3 mean on a Frigidaire washer?

Frigidaire lists E3 as follows: The lid is open or the lid lock has failed.

Is it safe to keep using the washer with E3?

Not until the cause is fixed.

Can I fix Frigidaire washer error E3 myself?

Only with the owner checks on this page, starting with: close the lid. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

https://owner.frigidaire.com/support-articles/article/1829706-laundry-top-loading-washer-displaying-error-code-e3-washer-lid-open-or-lid-lock-failed- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.