Frigidaire Washer Error Code F2: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire washer error code F2 means: There is too much soap or the wrong type of soap. Suds often leak out or overflow. [1] Keep using it? Yes. Start with the owner checks below, beginning with: use he detergent.

Quick facts

Code	F2
Also shown as	None listed by the manufacturer
Brand / appliance	Frigidaire washer (top load washers (e1–e5); f2 applies to front load)
System	Suds / detergent
Official meaning	There is too much soap or the wrong type of soap. Suds often leak out or overflow. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Frigidaire support (owner.frigidaire.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F2 means on a Frigidaire washer

There is too much soap or the wrong type of soap. Suds often leak out or overflow. [1]

This is a suds / detergent code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire washer error code F2 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Frigidaire's published guidance [1], rewritten for clarity.

Use HE detergent. Use high-efficiency detergent.
Use less. Don't use too much detergent.
Clean. Run an empty Quick Wash cycle.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first

Frequently asked questions

What does error code F2 mean on a Frigidaire washer?

Frigidaire lists F2 as follows: There is too much soap or the wrong type of soap. Suds often leak out or overflow.

Is it safe to keep using the washer with F2?

Yes.

Can I fix Frigidaire washer error F2 myself?

Only with the owner checks on this page, starting with: use he detergent. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

https://owner.frigidaire.com/support-articles/article/1825280-laundry-front-loading-washer-displaying-error-code-f2-too-many-suds-or-suds-overflowing- (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.