Whirlpool Front Load Washer Error Code F8E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool front load washer error code F8E1 means: The washer is not detecting the right amount of incoming water. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: start the drain routine.

Quick facts

Code	F8E1
Also shown as	F8 E1, Lo FL, No Water Detected
Brand / appliance	Whirlpool front load washer (front load washers)
System	Water fill
Official meaning	The washer is not detecting the right amount of incoming water. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F8E1 means on a Whirlpool front load washer

The washer is not detecting the right amount of incoming water. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool front load washer error code F8E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Start the drain routine. If the control is unresponsive, press Power. A drain routine runs for about 8–10 minutes.
Open both valves. Make sure the hot and cold valves are fully open and both hoses are connected.
Check the hoses. Make sure the hoses aren't kinked and that hot (red) and cold (blue) are on the correct valves.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code F8E1 mean on a Whirlpool front load washer?

Whirlpool lists F8E1 as follows: The washer is not detecting the right amount of incoming water.

Is it safe to keep using the front load washer with F8E1?

Not until the cause is fixed.

Can I fix Whirlpool front load washer error F8E1 myself?

Only with the owner checks on this page, starting with: start the drain routine. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Is F8 E1 the same as F8E1?

Yes. Whirlpool's documentation lists F8 E1, Lo FL, No Water Detected with the same meaning as F8E1; the display format depends on the model.

Sources

Whirlpool Product Help: F8 E1 - Front Load Washer (official)
Whirlpool Product Help: Lo FL - Front Load Washer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.