Whirlpool Front Load Washer Error Code FH: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool front load washer error code FH means: There is a water inlet problem: no water, or not enough water. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: cancel and unplug.

Quick facts

Code	FH
Also shown as	None listed by the manufacturer
Brand / appliance	Whirlpool front load washer (front load washers)
System	Water fill
Official meaning	There is a water inlet problem: no water, or not enough water. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code FH means on a Whirlpool front load washer

There is a water inlet problem: no water, or not enough water. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool front load washer error code FH (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Cancel and unplug. Press PAUSE/CANCEL twice, then unplug the washer or switch off its power.
Open both faucets. Make sure the hot and cold faucets are fully on.
Check screens and hoses. Make sure the inlet screens aren't clogged and the hoses aren't kinked.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code FH mean on a Whirlpool front load washer?

Whirlpool lists FH as follows: There is a water inlet problem: no water, or not enough water.

Is it safe to keep using the front load washer with FH?

Not until the cause is fixed.

Can I fix Whirlpool front load washer error FH myself?

Only with the owner checks on this page, starting with: cancel and unplug. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Sources

Whirlpool Product Help: FH - Front Load Washer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.